Small Log Splitter: Top Picks Of 2022
By, Peter BrownUpdated
These days, especially in June 2022, you can readily find the Small log splitter on the internet in various styles and costs. However, not all of them will meet your requirements or fit inside your budget. As a result, we sought evaluations and recommendations from certain professionals to find the finest ones from well-known brands such as Wen, Bilt hard, Kindling cracker, Manioshiya, Snugniture, Southland outdoor power equipment, Superhandy, Kabin.
Products Suggest
TOP Choice #1
![WEN 56207 6.5-Ton Electric Log Splitter,Black]()
- Made of high-quality 1040 carbon steel, stronger and durable than cast iron
- Virtually maintenance-free
- Safety and Stability: Our kindle tool features bolt holes on the base so it can be fixed to stump or other anchor. This provides extra stability and height for even more efficient splitting. The base plate is specially made of steel, so it’s very good stability and sturdy.
- Easy to Use: Simply place the log in our splitter / cracker. The metal rail holds the wood in place. Then hit down on the wood with a hammer, mallet or even another piece of wood. There are no dangerous blades yet it cuts logs easily with minimal labor.
6
![Southland Outdoor Power Equipment SELS60 6 Ton Electric Log Splitter, Red]()
- Effortlessly does big splitting jobs with a 18-second cycle time
- Heavy duty 1.75 HP, 15 amp induction motor delivers maximum performance for the most rugged condition
- A safe and easy way to make kindling with no moving blade or sharpened object passing by your hands
- Virtually maintenance-free
- PORTABLE DESIGN - Our lightweight horizontal full beam and steel wedge log splitter design is built to be portable with fast and easy set up for anywhere nature takes you; Complete with 7” inch Sturdy transport wheels, allowing for smooth maneuvering for easy transportation from site to site
- ECO-FRIENDLY - (Green and Safe), unlike gasoline-powered devices, electric-powered units produce no smog/fumes/emissions and are both gas and exhaust free, while being quieter; Can be used on the ground or on a workbench, outside and inside
- BASE IS READY-MADE FOR ATTACHMENT: Our kindle tool features bolt holes on the base so it can be fixed to stump or other anchor. This provides extra stablity & height for even more efficient splitting. The X style base is more stable than other types.
- HANDLES MAKE CARRYING EASY: The handle design allows the Kindle Quick to be easily carried to the bonfire, cottage, RV & campsite. The base also works as a crate to carry wood wherever you need it. So cut your kindling & pack it up for carrying too!
- CONSISTENCY – (POWER) unlike electric-powered splitters, gasoline power plant produces greater consistent pounds force per square inch and are more versatile for portable applications by eliminating the constraint of needing access to an electrical power source.
- EFFICIENCY – the AlphaWorks engine provides a smooth linear power curve to help avoid cumbersome performance during operation. The 7.5 Second cycle time and consistent force allows the wedge to smoothly slice through your wood pile with confidence.
To Choose The Small log splitter, What Criteria Do You Need To Study Before?
Almost all buyers are anxious about getting Small log splitter. Whenever creating multiple purchases, various issues need to be resolved. Our market expertise will give you help to make the best shopping selection.
It is advised that you perform your research before purchasing Small log splitter. Consider the following questions.
- What are the benefits of purchasing this item?
- When determining to consider investing, what factors should I take into account?
- Enjoy the benefits of purchasing online. How does it benefit consumers?
- Should you pay more for this product?
- What is the most valuable item on the market right now, as perusers?
The info related to Small log splitters has also become more available on the internet, thanks to the rapid development of websites, forums, and space for user evaluations and comments.
Many on our list have been tried and evaluated by inventors. Consider the following factors:
Splitters
Log splitters can be used in either the vertical or horizontal positions. Some log splitters can operate in the horizontal position while others have been designed for both. Vertical splitters place the log horizontally on the table and lower the wedge to separate the log. The horizontal position is where you place the log on the table so that the blade can pierce the end.
A log splitter may come equipped with a lift that you can lower down to place the logs, then push the lever to raise them to the same height as the table. You don't need to transport the logs on the lift, making your job even more efficient.
A log splitter may come equipped with a lift that you can lower down to place the logs, then push the lever to raise them to the same height as the table. You don't need to transport the logs on the lift, making your job even more efficient.
Log Size
There are limits to the sizes of logs that a splitter can handle. Gas-powered models with the most horsepower can cut logs up to 24 inches in length and weight as high as 100 pounds. The electric models are capable of handling logs up to 20 inches long and no larger than 10 inches in size.
Driving Force
A log splitting machine requires a great deal of power to drive a cutting blade through it. This driving force is often measured in tons.
Gas log splitters tend to be more powerful than electric ones. Gas log splitters can be driven by over 30 tonnes of force. However, 25 ton is the average. This is enough power to cut logs to approximately 24 inches in size.
The average electric log splitter has 6-10 tons of power, enough to cut logs to 12 inches in size.
Log splitters that are pump-type can handle logs as large as 10 inches in diameter. They can usually produce around 10 ton of power but work slower than electric or gas log splitters. You will also need your own energy to generate the initial power.
Gas log splitters tend to be more powerful than electric ones. Gas log splitters can be driven by over 30 tonnes of force. However, 25 ton is the average. This is enough power to cut logs to approximately 24 inches in size.
The average electric log splitter has 6-10 tons of power, enough to cut logs to 12 inches in size.
Log splitters that are pump-type can handle logs as large as 10 inches in diameter. They can usually produce around 10 ton of power but work slower than electric or gas log splitters. You will also need your own energy to generate the initial power.
Portability
Two back wheels are a common feature in DIY log splitters. They can be used to move the machine from one place to the next. Simply lift the other end, and then push the wheelbarrow like you would with a regular car. Commercial-sized splitters can often be attached to a trailer and pulled into the woods.
Log splitters that are compact can be stored in a small space, but they're still strong enough for individual heating purposes. Log lengths are limited to 16 inches. A chainsaw might be needed to cut longer logs. Also, manual splitters and split axes take up less space than powered splitters.
Log splitters that are compact can be stored in a small space, but they're still strong enough for individual heating purposes. Log lengths are limited to 16 inches. A chainsaw might be needed to cut longer logs. Also, manual splitters and split axes take up less space than powered splitters.
Maintenance
Every tool needs to be cleaned and lubricated. Manual and electric log splitters require less maintenance than tractor-mounted or gas-powered models.
Power Source
You can choose from three types: electric, manual, or gas.
- The most powerful log splitters use gas-powered engines. This is the most powerful option if you plan to regularly use your log splitter on extremely hard or large timber.
- The power of electric log splitters is generally sufficient to handle medium-sized logs with light-to moderate hardness. These tools can't be used to split wood while on the move because they will need to be connected by a power cord. They are still lightweight and do not emit any gas fumes. This makes them an excellent choice for those who only occasionally use their log splitter to make firewood at home.
- There are many types of manual log splitters, however all require you to use your strength at least partially. Some require that you pump the levers to create enough pressure to propel the splitter through the log. Others hold the log steady while you perform the hard work. A manual splitter won't cut through large volumes of wood, or even hardwood. However, it's great for small jobs like making kindling and very little firewood.
- The most powerful log splitters use gas-powered engines. This is the most powerful option if you plan to regularly use your log splitter on extremely hard or large timber.
- The power of electric log splitters is generally sufficient to handle medium-sized logs with light-to moderate hardness. These tools can't be used to split wood while on the move because they will need to be connected by a power cord. They are still lightweight and do not emit any gas fumes. This makes them an excellent choice for those who only occasionally use their log splitter to make firewood at home.
- There are many types of manual log splitters, however all require you to use your strength at least partially. Some require that you pump the levers to create enough pressure to propel the splitter through the log. Others hold the log steady while you perform the hard work. A manual splitter won't cut through large volumes of wood, or even hardwood. However, it's great for small jobs like making kindling and very little firewood.
Cycle Time
The log splitter's time to cut through logs is measured in its cycle time. This number can be affected by many variables, such as the log's size or hardness. As a rule of thumb, electric log splitters run faster than gas lots. The average cycle time is anywhere between 10 and 20 seconds. However, you can find high-powered models that take as little as three seconds. However, most log-splitting tasks can be completed in around 15 seconds for large loads.
Type Of Wood
Unseasoned hardwoods such as maple and oak can be difficult to handle by underpowered machines. Splitting hardwoods requires more power.
Single Or Two-Handed Operation
Log splitters may require two-hand operation. This means that you must use your hands both to move the two levers. To operate this model, both of the levers must be pushed down. The wedge will not move if you push only one lever. Because there is little chance of you being injured in the event of a mechanical breakdown, this type of wedge is safer. This type can be used with both powered and manual log splitters.
This type of wedge requires one hand to push or lift the lever. If the log splitter is used with your free hand, it can cause serious injuries if you place the hand too close to the wedge. This can lead to serious injuries if you try and move the log using your left hand after the split process has begun.
This type of wedge requires one hand to push or lift the lever. If the log splitter is used with your free hand, it can cause serious injuries if you place the hand too close to the wedge. This can lead to serious injuries if you try and move the log using your left hand after the split process has begun.
Auto Return
One lever on most log splitters is pulled, held down, to extend the blade, then another lever is pulled, held down, to retract it. This method is acceptable for splitting wood. However, if your log splitter features auto return it will speed up the process.
The auto-return function allows you to position a log, press a single lever, and the ram will retract to the original position. There is no extra lever to keep the ram in place. The user can quickly take out a log split and place a new log on the machine, all while the ram retracts to its original position.
The auto-return function allows you to position a log, press a single lever, and the ram will retract to the original position. There is no extra lever to keep the ram in place. The user can quickly take out a log split and place a new log on the machine, all while the ram retracts to its original position.
FAQs
1. What’s The Difference Between A Full-beam And Half-beam Log Splitter?
Full-beam log splitters, both electric and gas, are designed to hold the whole log. There are some other differences. The main difference between a full-beam and half-beam log splitting machine is the shorter bed. This means that part of hydraulic cylinder, which is the part that applies the splitting force on the log, is not supported. This doesn't impact the performance or power of the log splitter, but there are still half-beam logsplitters that can handle just as much weight as full beam models.
Half-beam splitters will be cheaper than full beam splitters, and they are lighter which should help you make a decision about your purchase. Full-beam splitters can still be towable behind cars, but this is a problem if your log splitting equipment needs to travel to remote locations.
Half-beam splitters will be cheaper than full beam splitters, and they are lighter which should help you make a decision about your purchase. Full-beam splitters can still be towable behind cars, but this is a problem if your log splitting equipment needs to travel to remote locations.
2. What Size Log Can A Log Splitter Chop?
The log size and the splitter tonnage ratings are closely linked. A log can be split thicker or wider if it is subject to more pressure. Some common benchmarks include: 6 inches will be split by 4 tons, 12 inches will be split by 16 tons, 24 inches will break a 12-inch log and 24 inches will be split at 30 tons. These are just guidelines. Different wood species split differently, so seasoned wood can often be more difficult to split than greenwood.
3. Can I Use A Commercial Log Splitter For My Household Needs?
You can, as long as you choose the right size for your log splitting requirements. Small log splitters, usually less than 20 tonnes, are sufficient for home use. You will need a larger log splitter if you plan to cut logs that are longer than usual. This is usually in the range of 20-40 tons.
4. How Does A Log Splitter Work?
Log splitters that work well use a forceful push to get a log in a blade, or a blade from the end of an iron ram pushing into a log. This will allow it to be split apart. Some log splitters can be powered with hydraulics. Others are manually operated.
5. How Do I Move A Log Splitter?
For easy transport, log splitters are equipped with wheels. Log splitters can be difficult to transport due to their weight. If you have to transport it to a distant location, your car can tow it.
6. Can You Move A Log Splitter By Hand?
Log splitters can be quite heavy. They weigh between 9 and 100 pounds for manual models, as well as several hundred for those powered by gas. The larger models have large wheels and a handle, making it easier to move them. However, the biggest splitters can be mounted on trailers or with their own wheelbases that can be towable by trucks or ATVs.
7. What Extension Cords Can I Use For An Electric Log Splitter?
Check first to see if the log splitter manufacturer has made any recommendations regarding extension cords. Use these if they've given you any. Use a thick extension number that's just right for the job. An extension cord that is thicker than a thin one can carry sufficient current. A thin extension cord could cause a decrease in voltage or power loss and can overheat your log splitter. Thickness is determined by the gauge. The lower gauge cords are more durable.
Do not extend the cord beyond 50 feet. The log splitter will be less powered if the cord exceeds this length. To ensure the best possible electric power to the log splitter, keep the cord as short and manageable as possible.
For gas log splitters, and electric log splitters outside, make sure the extension cord is suitable for outdoor use. Safety risks can be created by using a cord intended for indoor use outdoors.
Do not extend the cord beyond 50 feet. The log splitter will be less powered if the cord exceeds this length. To ensure the best possible electric power to the log splitter, keep the cord as short and manageable as possible.
For gas log splitters, and electric log splitters outside, make sure the extension cord is suitable for outdoor use. Safety risks can be created by using a cord intended for indoor use outdoors.
8. How Long Should Logs Dry Before Splitting?
Splitting wood using a maul requires that hardwoods such as oak, maple and beech are split while they're still green. Softwoods, like pine, fir and spruce, should dry for six to twelve months prior to splitting to ensure the process is as smooth as possible. If you are able to split wood using a hydraulic log splitting machine, it is possible to do so at any stage. Allowing the wood to dry is beneficial as it makes the job lighter and more straightforward to load onto the splitter.
9. How Much Power Does My Log Splitter Need?
Splitters that can handle thicker and more dense logs will require more power than those used for smaller logs and softwoods like cedar or pine. A 4-ton splitter can handle logs of up to 6in diameter. However, a large 24-inch tree trunk will require a 20-ton splitting machine.
10. What Type Of Log Splitter Should I Buy?
You want a log splitter that is able to handle all the jobs you face and doesn't get in your way while not being used. A compact electric log splitting machine may work well if you are only using it to split small logs for fireplace use. A powerful gas log splitter may be a worthwhile investment if you are using wood for your primary heat source.
11. Do I Need To Sharpen The Splitting Wedge Of A Log Splitter?
It will become blunt. The log splitter will still work for quite a while until it becomes too blunt. The amount of log splitting that you do will determine how long it takes for your wedge to become blunt. This can vary greatly from one person to another. It is important to watch your wedge for any signs of dullness, and to then sharpen the blade. You can use a combination of both a coarse and fine metal file to sharpen the wedge. Begin by removing any flaws from each end of the wedge using the coarse metal filing. To begin sharpening, smoothen the edges of each side. Use the fine metal file to finish the job. Make sure you file both ends of the wedge the same number of times.
12. What Types Of Wood Can I Split?
A log splitter can be used to split any type of wood. The log splitter is powerful enough to cut green logs and other hardy species such as oak, maple, walnut. You can use their high-capacity property on all types of wood. Green wood is more difficult and may require longer splitting. A log splitter can split larger logs than an ax, or splitting maul. Log splitters are capable of splitting logs up to 25 inches in diameter. This is almost impossible with an ax.
Since merchandising consultant pros have a wide variety of expertise, the information above is presumed to be accurate. The data of Small log splitter is also updated on a regular basis. You may feel confident that the data is current and accurate.
Please report any problems with Small log splitter so that we can improve your experience. We'll work even harder to improve our quality as a consequence of your favorable comments!
By, Peter Brown
